Introduction to Fixed Asset Management

There are obvious benefits from implementing and maintaining a record and control over assets. Savings can be obtained from being able to both see current asset deployment and thenby maximizing their use. Monitoring assets will reduce unauthorized use or misappropriation and insure employees leaving a firm return assets under their control. In some cases a system is mandated by government regulations, terms of lending, public grant terms, insurance terms etc. One person can maintain and manage all fixed assets of a business if they have software to assist them. Computer systems and software available reduce complexity, save time and prevent mistakes. Why use an asset management software program?

While paper and pencil methods can be used, software programs assist in the recording, maintenance and auditing of assets. This saves time and gives a clear picture of assets since sorting and viewing in different ways is quick and easy.

The most basic 'solution' would be using a spreadsheet program such as excel. Even after migrating to software specifically designed for asset management there are times that a spreadsheet program may continue to be useful.

What is an Asset?

What you call an asset often depends upon your business activities. The first thing that comes to mind is fixed assets such as computers, production equipment, office furnishings etc. You might even wish to consider employees as assets or even service and maintenance contracts. A flexible asset management software program can provide a way to track many things most of us would not consider to be assets.

What are my first steps in setting up a system or 'solution'?

1: Decide what assets will be managed.

The more assets the more work in setting up your system. Limiting assets to only those over a certain dollar value is a good idea.

2: Deciding what characteristics of assets it is important to record within the software.

Your choices will not only have an effect upon the amount of work required but also the amount to which you can manipulate and view asset information by sorting on asset information field or combination of fields.

For example if you setup a field for 'location' then you can sort data to see what assets are in each location. If you also have a field for 'type' or 'class' then you could further sort and display to show only certain types of assets such as computers at one or more location.

As in every aspect of life one has to make tough choices between what is ideal and what is feasible. Your choices will have an effect upon data data when new assets arrive as well as collecting information about existing assets. Choices you make will also have a bearing upon your choice of software since some may not handle everything you want. One such a limitation is found within the AssetTrakker Pro software program. TrackitSoftware does not provide a method of tracking depreciation because it was felt this added too much complexity requiring the collecting and maintaining of a lot more data. Additionally, they felt, handling depreciation requires superior knowledge of government rules and regulations beyond the expertise of the very people that stand to benefit most from asset management. Accounting departments already calculate and account for depreciation. * Some software does promote depreciation calculation but only limited functionality that in most cases is not the way regulations demand.

Some help!

Below is a listing of Asset Attributes 'fields' for your consideration. You will not want to use all of them for your own 'solution' and may well have additional ones you need.

Asset #: The key identification reference used to track assets. They can be straight numbers or a number with an alphabet prefix. (0001 or A001). This number is used for audit purposes and for cross-reference.

Make: Manufacturer

Model: Use when arranging service or buying parts. Use as allowed grouping by model type.

Serial #: Specific asset identification. Needed when making warranty or insurance claims.

Cost to Repl .: Estimate the cost of replacing an asset. Useful for planning, risk assessment and insurance.

Cross Ref. #: Reference other asset number or tie together group of assets.

Type: Can be used for general grouping such as furniture, computer, shipping, etc.

Condition: Helpful to see what is likely to require replacement or decide on service needs.

Description: Other detail in addition to make, model, and serial number.

Memo: Additional information about the asset. If a computer you might want to list details of the hardware configuration or even the programs installed on it.

Department: This is helpful for sorting assets by department to assist in auditing.

Location: Good field to have so that a search / sort can give you a clear view of where assets are located.

Used by: Necessary if you have assets in the personal possession of an employee and / or assets off business concessions.

Date Assigned: Useful if assets are moved around or for telling how long an asset has been at its current location.

Expected EOL: The anticipated date when the asset will no longer be useful.

Funded by: Source of funds if provided by Bond Issue, or outside funds (loan) or a grant.

Cost: Total cost of acquiring an asset.

Date Acquired: Helps give some idea when replacement may be required.

Disposed: Indicates an asset has been disposed of.

Disposed Date: Date asset was disposed of.

Business Use%: Used if an asset is not used full time by the business to break down asset use. Not for everyone, but a field that imagination might find an indispensable use for.

OUT: Used for Tool / Equipment Tracking,

Taken By / In From: Used for Tool / Equipment Tracking to indicate who is taking or returning item.

Date Due: Used for Tool / Equipment Tracking to show when an asset is due back.

Recovered Value: Net proceeds of the disposal of an asset.

Disposed Detail: Notes on how and where an asset was treated of.

Warranty: Indicates if asset is covered by a warranty or could be used if covered by a service / maintenance contract.

Warranty Expiry: It is useful to see what expiries are approaching for tracking maintenance or service agreements. Helps prevent paying for service covered by warranty as well as prompting the repair of items before expiration.

Image: Can assist in asset identification or where 'look' is an important feature. Useful if insurance claim ever made.

Value: Could be amount the asset is insured for. Risk exposure control.

Leased: Helps keep track of Leased vs Owned assets.

Lease End: Used to warn when assets have to be replaced or the lease has to be renewed according to the terms of the lease.

Lease Start: Commencement date of lease on leased equipment.

Lease Co: The name of the company from which an asset is leased.

Audit Date: This column records the date the batch scans of assets were made for audit purposes.

Auditor: Record the name of the person who performed the audit.

What next?

By now you have a good idea of ​​what asset information you want to track. Before looking at the various software packages available you should consider how many people will be entering data and how many will be accessing the data. For a smaller organization it is likely that just one person will be involved but in larger firms despite a number will wish to participate. Your situation could require purchasing more than one software license and the software must support multiple users.

Use a Barcode Scanner?

A barcode scanner can be used to speed data entry and auditing. This will add to the cost and most lower priced software packages offer limited support for barcode scanners. If properly incorporated into software a scanner can provide excellent value and save a lot of time, particularly for annual audit purposes.

Below are outlined the types of barcode scanners used with asset management software.

A 'dumb' tethered ccd scanner is cheapest and purchased for around $ 70. This can only be used when plugged into the computer and acts just to a keyboard in that you scan a barcode and it is put into whatever cell or space you are in.

A 'laser' tethered scanner is more money but will be able to scan smaller barcodes and sometimes have a defect field of view (easier to scan a barcode quickly).

A ccd or laser scanner which has built in memory so scans can be made and then the scanner can be brought back and plugged into a computer, and those scans uploaded. This is extremely useful for audit purposes. For maximum utility your software should be optimized to take advantage of this 'batch' memory capability. A capable unit can be obtained for around $ 150.

A laser scanner with internal memory, as well as an input screen and keys, means that after scanning a barcode you can add additional information. These are more expensive and again their use has to be integrated into your management software. While prices are coming down you are looking at units in the pocket pc price range plus scanner cost. It is usual for software utilizing these units to also, for some reason, be priced higher.

Asset Management Software

The range of prices for asset management software is $ 200 to $ 10,000 and all require you to do the entry of existing asset data as well as some setting up for your requirements. Some offer telephone advice at additional cost but hands on assistance only comes with expensive packages (this level of software requires expensive sales force and marketing expense so possibly their price, for the features provided, may seem high).

Purchasing Criteria a lot of people seem to use. You may have more.

1: Price 2: Ease of implementation of system 3: Ease of use 4: Ability to fit the business 5: Functionality 6: Potential to handle growth

What you can obtain for a reasonable price

A program with full relational database, such as MS SQL Server Express, or open source database. Today there is no reason to set for less power or quality. Microsoft provides their SQL 2005 'Express' DB version at no cost.

A program that allows you to attach images of assets. While not necessary for everyone it is something that someday you might want to use.

A program that integrates the use of inexpensive 'batch' memory barcode scanners because, if not now, at some point in the future such an accessory will save time and money. Used in auditing it assures an asset was actually seen as barcode had to be scanned.

A program that will permit the management of 10,000+ assets. With decent memory in your computer and a fast full relational database engine there is not much of a limitation anymore and while certain functions may slow down a bit even a low cost program should handle over 10,000 assets.

A program that is flexible so you can take advantage of features later instead of having to implement everything at once.

* If more than one person is to be given access to the database then you should ensure that different levels of access can be set for different users to prevent unauthorized changes to data.

What you can get but not cheaply.

A program that integrates directly into your current accounting system.

A program that has full professional depreciation calculations.

A program that runs directly off your company server (lower cost software runs off workstations and while a central database can be located on your server and accessed by individual workstations this is not the same as complete software being server based with applets on workstations.

Hand holding and in house training to get your system up and running. There are firms that will sit down with you and ask you all the right questions, set up your software, audit and list all your assets and then train your staff how to operate and maintain your 'solution'. Most, to my knowledge, will recommend a mid to high priced software because it is easier to sell (commission higher as well) and easier for them to install due to their familiarity with it.

Nuts and Bolts

Gathering your Asset Information How you perform this step depends upon your situation. In our discussion below we assume you do not have existing asset information, in an existing excel spreadsheet or other format. If you do then you would save work by exporting / importing that data into your asset management software.

Starting your Asset Listing and Numbering from Scratch

This is an advantage because you are not limited by inherited constraints. Of course it is more work, as you can not just load in existing asset information but have to collect everything yourself.

Collecting asset information is time consuming. Getting this information accurately, with as little work as possible is important. Thinking about how to do the job and planning will help make this big job easier.

The following is how I suggest doing this but you may have your own, sometimes better plan.

Create data entry sheets that you will have people write in information about assets under their control. Your asset management software may create these or you could make up an excel spreadsheet to obtain them.

Try and obtain some 'buy in' from the department or location manager with control over assets. The closer to the asset you can allocate some responsibility the better that asset will be controlled. 'It's my department's asset' is more powerful an incentive than 'it's IT Dept's asset'.

Final steps

After entering data, that your co-operative managers helped you obtain, it is time to work with that data within your asset management software. It should not take long to become familiar with how it can present information to you on screen and in reports.

Now sit back and enjoy how easy it is to manage your assets.

Posted in general | Comments Off on Introduction to Fixed Asset Management

Advantages and Disadvantages of Professional Shopping Cart Software

Advantages & Disadvantages of professional shopping cart software As e-Commerce is becoming a regular technique in the business industry it appears that more and more software development firms are developing professional shopping cart software to be released in the market. There is currently a huge range of free shopping cart software that has been released, and it seems that most e-Commerce website owners prefer these free systems over paid for professional shopping cart software. In this article we are going to look at the advantages and disadvantages of professional shopping cart software.

Advantages

• Even though you will have to pay for the solution, you get a cart package that has been fully developed, tested and used in the real working world by other e-Commerce websites. If the solution is used by a popular website service then the chances are it has been under more than enough testing to be deemed ready for use.

• Professional shopping cart software will be supported by the people who developed it. A lot of free solutions out there are simply developed and then discontinued as the freelance developers move onto their next project. Support is essential if you are going to want upgrades as mentioned in our next point.

• As the system is supported, the development team are likely to fix any bugs that may occur and provide patches and security fixes. This means the shopping cart software will only get better as time goes on and furthermore improve your e-Commerce website.

• Your site is likely to be more secure when using a professional software solution as in most cases the it developed house private content management systems. This improves security as public content management systems such as WordPress are constantly under threat from hackers as they try to compromise the free source code.

• Another huge advantage of using professionally developed software in e-Commerce is that they will already support a huge range of different payment options for your customers. There are various carts – that only offer PayPal for payment by standard, and it can take a very long time to find plug-ins or figure out how to add other methods yourself. With professional software you can save time and possibly money as it is all included.

Disadvantages

• Your e-Commerce venture might be a small time project and professional cart does cost money which you may not have. In this case you may have to make do with a free shopping cart solution. The good part of conducting business online is that after you have made profit with the free system you can reinvest your money to buy a professional package.

• You trust the developers to do everything they promise to ensure the best experience. It might be slightly difficult to use at first and you might have to spend some time getting used to the bespoke system. You also have to understand that you are vulnerable until patches are made if a security flaw is found.

Posted in general | Comments Off on Advantages and Disadvantages of Professional Shopping Cart Software

Effective Job Numbering And Cost Code Systems

Overview

Many companies have a sequential job numbering system, but have you considered the possibility of altering the numbering sequence so you can pull reports for a certain type of project or projects by year and the informational reports that could be generated?

And, are your cost codes sufficient to cover the details you need to see in your reports? Do you lump all site related travel and subsistence into one code, or do you have the details of hotels vs. Housing and meals vs. Subsistence?

Not all software programs are sophisticated enough to allow for customized job type numbering sequences; However, even the basic job cost software systems can be adapted to allow for an advanced numbering system.

Specific Job Numbering Sequences

Advanced reporting techniques can yield a wealth of information. How jobs are numbered so ease the reporting burden so projects of a certain type and / or year can be easily excluded from the software. Samples of numbering sequences could be based on the following criteria:

· Year project was awarded

· Public vs. Private works

· Commercial vs. Residential

· Construction vs. Service

· Division (s) of the Company

If your software allows, you may start the job number with the year awarded, followed by the job type and then a sequential number. Management may request a report for gross revenue on all the commercial contractor improvement projects in 2013. If you have a numbering sequence, this would be an easy report to pull, rather than go through all your 2013 projects and manually add the numbers to obtain the Results.

The job cost master file is another good source of information if all fields are completed and there is a common usage of custom fields that can be used to pull reports.

Cost Codes – Too few or Too Many?

Often we see cost code lists that spill onto multiple pages. Most job cost software programs allow for use of one cost code for multiple categories (Labor, Materials, Direct Job Expense, etc.).

A good source to use for establishing a cost code list is the bid recap and detail sheets used when bidding projects. This will yield the different stages of labor, types of materials to install associated with that labor, the different types of equipment to be rented, categories of subcontractors and the details of direct job costs to be incurred.

These activities can be "numbered" to establish a list of cost codes. If the software allows for use of one code across multiple categories, give thought to not duplicating descriptions, but arranging codes together by "type" of work being performed, rented equipment, direct job expenses, work typically contracted out, etc.

Keeping your cost codes consistent will then allow even more sophisticated reporting – management can now ask for all commercial contractor improvement projects in 2013 and the total cost of crane rentals for the year on those specific projects.

Why Go Through These Steps?

History is a great source of information when anticipating the future. Cost details can be analyzed for specific types of jobs when preparing to bid a similar project. Historical information can be analyzed for margins on certain types of projects or a division of the company to make decisions on whether or not a certain type of work is profitable.

If fields are available in the job cost master file, reports can be declined not only by type and year but by project manager as well to look at performance and estimate vs. Actual results.

Conclusion

When developing any numbering system, consistency is important in order to maximize the reporting results. Management should determine the information they wish to see and develop job numbers and cost codes that will allow for advanced reporting not only to themselves but provide useful information to estimating, project managers and accounting as well.

Posted in general | Comments Off on Effective Job Numbering And Cost Code Systems

Strengths and Weaknesses of Waterfall Approach for Software Development

One of the most famous and widely used approaches for software development is the waterfall model. Waterfall approach is an old technique that has been in use for quite some time, but in modern times agile approach is gaining prominence.

Waterfall approach, as is evident from the name, refers to a systematic approach where one step comes after the other. It cannot go the other way round. The process works like the waterfall effect that flows in one direction, which is from up to down.

In this process the life cycle of the development process is predetermined. All the steps are defined before the start of the project. The approach is predictive, where the team is well aware of the order of each step and therefore works accordingly. It starts from the requirement analysis, the design phase and then proceeds on to the implementation, testing and the maintenance phases.

The waterfall approach can be quite beneficial for those who are quite clear on their requirements. A planned approach works for them because they want fixed processes and budget. Where fixed processes are beneficial, at the same time they can be inconvenient at times. In cases where the client is not clear on the requirements and finds in the middle of the project that he/she wants to change course, this approach can prove to be quite problematic.

Another point of the waterfall approach is that the requirement analysis and design of architectural structure can consume a lot of time. Extensive research is done initially as the next phases depend completely on the planning strategy. However, the good thing is that everything is thoroughly worked out and each aspect is studied beforehand. The developers in such cases know what is expected of them.

A waterfall approach works in a systematic order, with one step following the other and the testing phase comes in the end. If there are any big problems encountered in the testing phase, it means a long process to make the amends. The process can consume extra time and money.

We cannot conclude that one approach is better than the other, as every method would have its own strengths and weaknesses. The determination of success for each method depends on how it is being used and whether the approach suits the scope of work being undertaken. While one approach may be suitable for a particular project, it might become totally useless under different circumstances. For example, some believe that agile methods are not well suited for offshore development, as they require a closer contact and communication that is not possible in an offshore project.

Posted in general | Comments Off on Strengths and Weaknesses of Waterfall Approach for Software Development

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

Recommended Software for Arena Management

When there is a little over a month left to enter the data for a thousand plus cattle penning teams into a fickle spread sheet software program that was built by good intentioned volunteers; the last thing anyone should be doing is looking for replacement software. However, as any event/entry secretary or producer knows this is sometimes the lifeline that is needed to get the job done.

The preparation of all of the necessary data combined with balancing a three-quarter of a million dollar show in the six weeks prior to its start should have been enough to do. Throwing in a new piece of software to learn and master would be considered ludicrous to say the least. The producers deemed it to be a necessity in view of the history of inconsistencies in the program currently in use.

With a three-year old recommendation in hand and very little back ground checking, Arena Management Software became the chosen lifeline. The software was purchased, loaded onto the computers, played with for a day or so and then our team went to work. The KCI support group was there, day and night, to help with the learning curve and any snags that presented themselves. Our team quickly realized that the new user-friendly software program we had taken a chance on was going to be our ongoing choice for future events. The show was a success. The producers and contestants were happy. All was good in our world!

There have been a lot of years pass by since those short six weeks when our group became acquainted with the Arena Management Software. The program still provides a user-friendly format that has the talent to produce minimal data to realms of reports. From rodeo to cattle penning events the product continues to amaze our team with its ability to perform in and out of the arena.

Posted in general | Comments Off on Recommended Software for Arena Management

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software

How to Watch Satellite TV Online Without Any Satellite Dish

Anyone can watch satellite TV online without any satellite dish system nowdays. In case you do not know, this article would show you one time-tested and another new revolutionary way to watch satellite TV on the internet without having to set up a satellite dish.

Many of the older generation grew up in an era of satellite dishes, especially for those who live in the rural areas where cable do not exist. The dishes are transmitters and together with receivers are conduits for TV signals to be displayed as visual images and pictures on our TV screens. However, they are not always pleasant. Set up can be tough and definitely not for those who are not good with their hands or have poor technical skills. Satellite dishes have grown smaller in recent years but they used to be larger than 6 foot monsters in earlier days. If that irks you, you would be relieved to know that you can watch satellite TV online just like many others without satellite dish system.

What are the hardware and PC requirements you need to set up your 'satellite-dish less' PC satellite online TV?

1. A Good PCTV Card

A PCTV card can be installed onto your computer to make your computer work like a satellite television set. Such cards come in the form of internal or external hardware. If you are familiar with the inside of a computer, then an internal card could be a good choice since they tend to be cheaper and more affordable. However, do not bother yourself when you find it too troublesome to fix it internally because there are external cards that work more like plug-and-play gadgets. They cost more and can set you back easily by a few hundreds. As long as your PC has a spare USB port, this option to watch satellite TV online is open to you.

2. PC Requirements

I would suggest you check your systems configuration before you start shopping for a PCTV card. Most cards require a minimum Pentium 3 333MHz system to run well but remember to note down the specifications like RAM, hard disk space, Operating System, etc before you head to the stores.

3. Ready Internet Connection

PCTV cards work well with both dial-up and broadband connections. However, I have a word of advice here. Dial-up transmission runs like a snail and is a really serious party spoiler. You can end up more frustrated than glad that you are watching the program. Go for broadband connection if you can afford to.

Okay, now that we have discussed about the older commonly accepted method to watch satellite TV online, we will look at another new revolutionary technique. This requires the usage of PC satellite TV software which can be downloaded easily. The setup is simple and all it takes is downloading the software and clicking a few buttons before you are ready to watch satellite TV online from more than 3000 channels. Awesome is not it?

For more information on this PC satellite TV software, do a read up at my satellite TV blog.

This article may be freely reprinted or distributed in its entity in any ezine, newsletter, blog or website. The author's name, bio and website links must remain intact and be included with every reproduction.

Posted in general | Comments Off on How to Watch Satellite TV Online Without Any Satellite Dish

How Has Technology Changed Art?

We all are witnessing the changes being made in the art these days. Technology has the power to change anything. It is changing the traditional art into digital art.

Amazing digital art has taken place of traditional art. Digital art is exploring itself in many different ways that one can imagine. Different software is developed to increase the presence of digital art.

Photoshop Artists are one of the most common digital artists who give an amazing look to a picture with the help of imaging software and different applications.

These applications are developed with the help of technology. Anyone can be a digital artist having knowledge and proficiency in Photoshop.

Difference between traditional artists and digital artists is that traditional artists use paint and cement for their art and digital artists use imaging software and applications in their art. Some of the applications have the power to create 3D art work.

Technology has taken art into a new level of creativity. Let us talk about how technology has changed traditional art into digital art. We know that internet is ruling the world with its power. So, artists decided to present their art online with the help of internet. This is possible with use of technology.

You must have seen art galleries and attended painting exhibitions in your life. These doesn’t work well these days so artists find a way where they can get more attention and more praise for their work. Most of the artistic stuff is now seen online and is circulated to the art lovers.

There are some places where exhibitions are held and we do respect them. But presenting paintings, sculptures and art work online is in trend. Some of the artists are also showing their art on the basis of card swipe panel or coins.

How this work – when you enter coins or swipe card in the panel, the panel shows you some of the art work for a few minutes and then gets closed and if you want to see it again or explore more, further you need to swipe your card or add coins into it. This is how artists are using technology.

How digital artists are using technology for their art work

Digital artists already in touch with technology are aware of the systems that are in trend and use them to create their art work and sell them online.

Some of the professional digital artists are earning a lot of bucks by selling their art work. They can also design the ones that you want and are also ready to make any modifications you need.

They use different software to explore their skills and made it more impressive. They are using technologies that offer new ways to express their art work in a realistic way for much more time.

They are using different types of media and mix them to provide a more creative art work. Their 3D art work looks as real as it is present live in front of you.

Technology not only brings changes in education, medical field, industry and business but also brings a huge change in the art work and the artists as well.

Technology opens different paths for the artists to enter into for a good earning. They made their profession more powerful along with their art work.

In our busy lives we hardly get time to meet each other and our loved ones. How can it be possible to see exhibitions and galleries? So technology has brought this change in the art workers to show their skills and talent to people from anywhere in the world.

Technology is getting advanced and making more useful for the common man as well as artists. Technology has provided us with several things that we should be thankful. One of them is digital art work.

Posted in general | Comments Off on How Has Technology Changed Art?

How to Repair “Runtime Error 481”

The runtime error is one of the most common Windows problems that keep popping up and keeping your system from running smoothly and perfectly, even a small or a single error in the process will leave your system in a knot. This makes it even more important for any user to know how to fix runtime error 481. In order to fix or diagnose the problem correctly everyone should first know what the actual purpose of the runtime processes. It is an integral and essential part of the Windows system details to manage the handling of many services as well as many different software as running on the Windows platform. Since, the file actually handles a lot of information and settings at a time it is very prone to attack by many different viruses, malware and even spyware.

The problems – there can be many different symptoms to the errors related to the runtime process. The symptoms can range from a simple delayed operation of the software to much more complicated system freezes and error messages. This sort of problems may arise from many different factors starting from corruption of the system file due to a virus infection or any other malicious software to defective and invalid system registry entries.

Though the problems are varied but still the answer to the question remains pretty simple.

The solutions – the solution to the runtime error 481 can be many forms, as the problem itself may arise from many different sources. Though it is widely accepted that the most common reason for such errors is a corrupted registry entries but still many tools and software is required to be used in order to properly remove the problem.

  • If the error actually results after installing a new software always make sure to uninstall and reinstall the software to check whether the error was caused by it.
  • Is the process file is corrupted beyond repair it is always safe to replace the file with an original one from any windows XP CD using the system file Checker tool. This can also be achieved from the recovery console is the system has completely crashed due to the error and cannot be started in a normal way.
  • As the most common problems that can give out runtime related errors is widely identified as defective registry entries, it is best recommended that you always check your system with a proper registry cleaner before taking any drastic step.

Even if all of the above methods fail, you always have the option of reinstalling your operating system in order to solve the runtime error 481. Though this may seem the simplest one but the safest and wisest one would be to use a registry cleaner regularly and keep your system clean and healthy.

Posted in general | Comments Off on How to Repair “Runtime Error 481”